ISE SMART CONNECT KNX REMOTE ACCESS

ISE SMART CONNECT KNX REMOTE ACCESS

Secure remote access from anywhere, whether it's mobile or fixed line – unpack it, connect it and you're done!

Customers and electricians profit from the significant advantages of remote access. Easy set-up and secure remote installation and configuration make work considerably easier and save money when it comes to configuration, maintenance and care.

Teleservicing from anywhere

It has never been so secure and uncomplicated to connect to the KNX system remotely. You can forget about expensive house calls from your system integrator. Desired changes and system maintenance can be carried out quickly and individually, anywhere in the world – even while on the go.

Teleservicing from anywhere

Important events on your smartphone

Would you like to know whether everything is OK at home? Let your house tell you. You'll receive messages on your smartphone, e.g. when your smoke detector is activated or when someone rings your doorbell. You can decide whether you would like to be informed by telephone call, text message or e-mail. You can also receive images from the camera and values from the KNX (e.g. temperature).

Important events on your smartphone

Security

You can also access your web-based visualisation remotely, giving you an overview of your building at all times.

Security

Remote access to your visualization

You can also access your web-based visualisation remotely, giving you an overview of your building at all times.

Remote access to your visualization

Not accessible from the Internet?

Is the IP address of your connection not accessible from outside, e.g. a unitymedia (IPv6), an LTE or UMTS connection?

No problem! Our solution works here, too.

Unpack it → Connect it → You're ready to go!

Not accessible from the Internet?


One device, lots of functions...

...for electricians

  • Remote access for the ETS to the KNX system

  • Remote access for the Gira Expert to the Gira HomeServer

  • Remote desktop support

  • Integrated KNX/IP interfaces (group and bus monitors)

  • Integrated Ethernet switch

  • Message centres (e-mail, text message and voice message) controlled via KNX communication objects

  • Greater customer satisfaction thanks to faster responses

...for customers

  • Remote access to the visualisations and web pages of your smart home

  • Message centres (e-mail, text message and voice message)

  • Integrated access management enables monitoring at the push of a button

How does Secure Device Access (SDA) work?

The Remote Access is simply connected to the home network over Ethernet. It then connects to the portal server (www.securedeviceaccess.net) automatically through your existing Internet access. Communication between the Remote Access and the portal server is encrypted and secured with digital certificates.

With a connection to the home network, you can now access almost all of your network devices using the Internet. Depending on the network protocols supported by the respective device, access occurs directly through the SDA portal server or through the "SDA client" software available for different platforms. If you have a KNX installation in your house, you can connect it to the ise smart connect KNX Remote Access using the KNX connection if desired. This enables you, or your electrical installer, to access your KNX devices from anywhere, e.g. with the ETS.

Don't worry, though. The portal server is located in Germany and is subject to the German Data Protection Law!

 

Functions

  • Secure data transfer of HTML and ETS communication over the Internet

  • Optimised KNX/IP communication possible using mobile and very slow connections

  • Integrated IP interface with up to three tunnel connections (ETS bus or group monitor)

  • Access management with users and groups

  • Display of visualisations with web interface

  • Access to cameras and other web pages on the home network

  • Local device web page: Introduction of user name/password with encrypted communication

  • Portal connection information, even without ETS configuration

  • Notification support (e-mail, text message, voice and IFTTT)

Technical data

Voltage:

DC 24V to 30V

Power consumption:

2W

IP communication:

Ethernet 10/100 BaseT

KNX communication:

KNX/TP, S-Mode

Connections:

2x RJ45 (integrated switch)

Connection and branching terminals for KNX and 24V

Ambient temperature:

0°C to +45°C

Dimensions:

2 TE (REG plus)

Note:

Supply via external DC 24V.

For ETS4, ETS5 or higher (support ETS3 on request to sales@ise.de).

Ordering Info

Article number: 1-0003-004

Downloads

mime_icon
Installation Guide

 

assets/images/f/Flag_of_Germany-c4cc918f.svg- Icon assets/images/b/Flag_of_the_United_Kingdom-e7a35e4b.svg- Icon assets/images/1/Flag_of_the_Netherlands-7fa1a141.svg- Icon assets/images/1/Flag_of_Italy-1abde8b1.svg- Icon assets/images/5/Flag_of_Spain-def251d5.svg- Icon assets/images/4/Flag_of_France-a1939904.svg- Icon
mime_icon
Product Manual

Version from 18.01.2017

assets/images/f/Flag_of_Germany-c4cc918f.svg- Icon assets/images/b/Flag_of_the_United_Kingdom-e7a35e4b.svg- Icon
mime_icon
ISE SMART CONNECT KNX REMOTE ACCESS

ETS Product database entry Version 3.1

Download
mime_icon
SDA Client for Windows

Client for ETS und Homeserver Expert Version 1.3.3135

assets/images/f/Flag_of_Germany-c4cc918f.svg- Icon assets/images/b/Flag_of_the_United_Kingdom-e7a35e4b.svg- Icon
mime_icon
Firmware ISE SMART CONNECT REMOTE ACCESS

Installation file Version 3.0.1367

Download

New firmware version available for the ise smart connect KNX Remote Access!

Effective immediately, ise smart connect KNX Remote Access version 3.0 is being delivered (February 2017).

Improvements in the new version:

  • Improved browser support (e.g. Safari)

  • Local device web page: Introduction of user name/password with encrypted communication

  • Portal connection information, even without ETS configuration

  • Notification support (e-mail, text message, voice and IFTTT)

  • NTP setting configuration

The device can be updated using the integrated function on the device web page, or you can use the current firmware (see Downloads) with the firmware update tool.

Important: With a firmware version of 3.0 or higher, a user name and password are required for the device web site. The user name is "admin", and the default password is the complete connector ID of the device. We recommend changing the password after the first login.